Emulex TC03 rev. D; s/n CG9434

Pertec-standard magtape controller (TS11)

Location: Quad spares
Manufactured: August 1987 (8731)
Documentation: PDF, local copy (bitsavers.org)
- Appendix C includes useful internal configuration information for various transports in order to function with this controller
Quad width
800/1600/3200/6250 cpi capability
...

Present Configuration Settings:

CSR 772520 (standard address for TS11)
- SW3-1 ON
- SW3-2 OFF
Vector 224 (standard vector for TS11)
- SW2 1-4,6,8 ON
- SW2 5,7 OFF
Run/Reset
- SW1-1 OFF (RUN)
22-bit addressing OFF
- SW1-2 OFF (DISABLED)
Remote density select OFF
- SW1-3 OFF (DISABLED)
Tape coupler mode: Streaming/Formatted
- SW1-4 ON (FORMATTED)
- SW3-7 OFF
Density status option (non-standard) DISABLED
- SW2-9 OFF
Extended interblock gap option DISABLED
- SW2-10 OFF
Tape UNIT 0 enabled
- SW3-3 ON
Tape UNIT 1 disabled
- SW3-4 OFF
Tape UNIT 2 disabled
- SW3-5 OFF
Tape UNIT 3 disabled
- SW3-6 OFF
On-th-fly command option (Kennedy 9000/9100/9300) ENABLED
- SW3-9 OFF
Write data strobe option (trailing/leading) TRAILING
- SW3-10 OFF
[UNKNOWN]
- B-C ON
[UNKNOWN]
- D-E OFF
Alternate CSR Address 772440 [not enabled]
- F-G ON

In this configuration, using the Data Translation LAB DATEX system (11/03, 32KW, DLV11-J, AEC WINC-05/8), the TC03 works perfectly with the Cipher M891 transport.

In this configuration, using the Data Translation LAB DATAX system (11/03, 32KW, DLV11-J, AEC WINC-05/8), the TC03 works perfectly with the DEC TS05 transport.

<date>

<notes>

...